Where is bypass tray in printer

For details about loading envelopes, see Loading Envelopes. When copying from the bypass tray, see "Copying from the Bypass Tray", Copy. When the [Panel Key Sound] is turned off, it does not sound if you load paper into the bypass tray. Do not mix different types of paper. Customer Support. Contact Us. Toll Free: Elevity Technical Support. How to Use the Bypass Tray on a Copier. Written by Bill Willoughby. Facebook LinkedIn Twitter Email.

Open the stack bypass tray. Adjust the slide guides to match the size of the paper. Load the paper into the stack bypass tray. Loading Envelopes 1. Previous Story. Manuals Contents Previous Next. Setting Paper on the Bypass Tray This section gives instructions for setting paper on the bypass tray.

Printing onto paper with specific orientation When printing onto paper that has specific orientation requirements, such as envelopes or letterhead paper, be sure to set as the followings: If the paper feed orientation is , insert paper print side down in the bypass tray, and set the bottom edge of the paper toward the machine.

Extender Paper Guide. When loading thick paper, thin paper, or OHP transparencies, set paper size and paper type. The dedicated guide is in the upper side of the large capacity trays. Use only tab paper that is made of paper. Tab paper made of a material other than paper film, etc.

To copy onto the tabs of tab paper, [Tab Copy] in "Others" is useful. When loading multiple sheets of transparency film into the bypass tray, fan the sheets several times before loading. When printing on transparency film, remove each sheet as it is printed and output from the machine. Allowing sheets to stack in the output tray may result in curling.

Pull the bypass tray extension all the way out.